• ¡En oferta!
  • Nuevo

OM-POWER 2501A AMPLIFICADOR

6.299,00 €
Impuestos incluidos

NUEVO MODELO

Cantidad
Agotado

  • Pago seguro mediante plataformas de pago Pago seguro mediante plataformas de pago
  • Enviamos a cualquier provincia Española, Europa y resto del mundo Enviamos a cualquier provincia Española, Europa y resto del mundo
  • Aceptamos devoluciones en un máximo de 7 días con su embalaje y estado original Aceptamos devoluciones en un máximo de 7 días con su embalaje y estado original

GENERAL DESCRIPTION OF THE OM2501A AUTOMATIC AMPLIFIER

The automatic linear amplifier OM2501A is designed for all short wave amateur bands from 1.8 to 29 MHz (including WARC – bands) and all modes. It is equipped with a one piece of ceramic tetrode FU-728F.

Specification of OM2501A:

Frequency coverage: Amateur bands 1.8 – 29.7 MHz including WARC

Power output: 2500 W in SSB/CW on HF bands, 2000W on RTTY, FM

Drive power: 30 to 60 W for full output power

Input impedance: 50 Ohm VSWR < 1,5:1

Output amplification: 17 dB

Output impedance: 50 Ohm unbalanced

Maximum output SWR: 3:1

SWR protection: Automatic switching to STBY when reflected power is 350 W or higher

Intermodulation distortion: better then -32 dBc

Suppression of harmonics: < -50 dBc

Response speed of AUTO tune: less than 0,5s within same BAND ,less than 1s if out of BAND

Supported TRXs-CAT :

ICOM, ELECRAFT, KENWOOD, TEN-TEC ORION,

YEASU, Icom transceive protocol using by microHAM

devices – CI-V OUPUT , Flex Radios and Anan ( Apache Labs )

Tube: 1x FU-728F ceramic tetrode

Cooling: Centrifugal blower + axial blower

Power supply: switchable 220V, 230V, 240V, 50/60 Hz or other primary

voltages…. (for example 200V 50/60Hz for Japan)

Transformers: 2 pc’s of toroidal transformers 2.0 kVA

Protection circuits:

? SWR too high

? Anode current too high

? Screen current too high

? Mistuning of power amplifier

? Temperature to high

? Soft start for fuse protection

? 'switch –on blocking ' at opened amplifier

Indicator:

?

4,3' colour touch screen display

Features

? support automatic external ANT switching

? Memory for faults and warning, easy maintenance

? Automatic set-up idle current (BIAS ) – don’t need to manually adjust after changing the tube

? Automatic switch on of additional fan according to temperature

? T/R System : QSK operation

? REMOTE control - connector for LAN connection – remote control software

free of charge

Mechanical parameters: 485 mm x 200 mm x 455 mm (width x height x depth)

Weight: 40 kg

0000002950
Nuevo